OEM Customized Edm - Customized Siliver Doorbell Camera Housing Made By Plastic Injection Molding – DTG Detail:
ABS + PC combines the excellent characteristics of the two materials. The Synthetic material is suitable for the housing of electronic products, with good overall performance, high impact strength, chemical stability, and electrical properties.
This is a smart doorbell product. The appearance requirements must be very attractive to customers. The drawing texture is made on the mold; in the injection molding production process, there should be no oil responsibility on the mold surface. The robot is automatically produced, and the operator packs early. You must wear dust-free gloves to avoid the sweat from your hands sticking to the product. If there is oil responsibility, it will directly affect the adhesion of the electroplating.
This brushing surface was made by mold texture.
Basemap production→photographic platemaking→screen printing→ink blending→decal paper printing decorative pattern→ink drying→mold pre-treatment→decal transfer→drying→repairing→corrosion→inspection→cleaning and anti-rust.
Process principle and process of mold surface corrosion skin texture:
Mold etching adopts anti-corrosion transfer ink, screen printing decorative pattern on decal paper, and transfer the decorative pattern ink to the mold with filming method. After drying and trimming, chemical corrosion is performed to form bumps on the mold. Type decorative pattern.
That’s the introduction of this product, if you have similar design need to make prototyping or mold, warmly welcome to contact us at any time.
|
DTG Mould Trade Process |
|
|
Quote |
According to sample, drawing and specific requirement. |
|
Discussion |
Mold material, cavity number, price, runner, payment, etc. |
|
S/C Signature |
Approval for all the items |
|
Advance |
Pay 50% by T/T |
|
Product Design Checking |
We check the product design. If some position is not perfect, or can not be done on the mould, we will send customer the report. |
|
Mould Design |
We make mould design on the basis of confirmed product design, and send to customer for confirmation. |
|
Mold Tooling |
We start to make mold after mold design confirmed |
|
Mold Processing |
Send report to customer once each week |
|
Mold Testing |
Send trial samples and try-out report to customer for confirmation |
|
Mold Modification |
According to customer’s feedback |
|
Balance settlement |
50% by T/T after the customer approved the trial sample and mould quality. |
|
Delivery |
Delivery by sea or air. The forwarder can be designated by your side. |
Sale Services
Pre-sale:
Our company provide good salesman for professional and promptly communication.
In-sale:
We have strong designer teams, will support customer R&D, If the customer send us samples, we can make product drawing and do the modification as per customer request and send to customer for approval. Also we will accord our experience and knowledge to provide customers our technological suggestions.
After-sale:
If our product have quality problem during our guarantee period, we will send you free for replace the broken piece; also if you have any issue in using our moulds, we provide you professional communication.
Other Services
We make the commitment of service as below:
1.Lead time: 30-50 working days
2.Design period: 1-5 working days
3.Email reply: within 24 hours
4.Quotation: within 2 working days
5.Customer complaints: reply within 12 hours
6.Phone call service: 24H/7D/365D
7.Spare parts: 30%, 50%, 100%, according to specific requirement
8.Free sample: according to specific requirement
We guarantee to provide the best and quick mold service for customers!
|
1 |
Best design,competitive price |
|
2 |
20 years rich experience worker |
|
3 |
Professional in design & making plastic mould |
|
4 |
One stop solution |
|
5 |
On time delivery |
|
6 |
Best after-sale service |
|
7 |
Specialized in kinds of plastic injection molds. |
DTG–Your reliable plastic mould and prototype supplier!
Product detail pictures:
Related Product Guide:
Sticking to the perception of Creating products of top of the range and earning mates with people today from all over the world, we constantly put the desire of consumers in the first place for OEM Customized Edm - Customized Siliver Doorbell Camera Housing Made By Plastic Injection Molding – DTG, The product will supply to all over the world, such as: Azerbaijan, Kenya, Kazakhstan, The credibility is the priority, and the service is the vitality. We promise we have the ability to provide excellent quality and reasonable price products for customers. With us, your safety is guaranteed.
By Miguel from Pretoria - 2017.08.18 11:04
We have been cooperated with this company for many years, the company always ensure timely delivery ,good quality and correct number, we are good partners.
By Myrna from America - 2018.12.30 10:21
