Shin ya fi arha don yin allura ko bugu na 3D?

Ko gyare-gyaren allura ko bugu na 3D ya fi rahusa ya dogara da ƙarar samarwa, farashin kayan aiki, da kashe kuɗin saiti. Anan ga kwatancen don taimakawa tantance wace hanya ce ta fi dacewa da farashi don takamaiman bukatunku:

Farashin Gaba:Injection Moldingvs.3D Bugawa
-Injection Molding: Babban farashin gaba saboda ƙirƙira ƙirƙira
- Buga 3D: Ƙananan farashi na gaba, saboda ba a buƙatar ƙira. Kuna iya farawa da ƴan daloli kaɗan ta amfani da firintocin masu daraja.

Nasara don Ƙarfin Kuɗi na Gaba: Buga 3D

Farashin kowane Sashe: Injection Molding vs. 3D Printing
- Injection Molding: Bayan farko mold zuba jari, kowane bangare farashin a matsayin ƴan cents zuwa ƴan daloli, yin shi sosai tattali domin taro samar (1,000+ raka'a).
- Buga 3D: Kowane bangare ya kasance mai tsada sosai ($5 – $50+ kowace raka'a) saboda tsayin lokutan bugu da farashin kayan.

Wanda ya ci nasara don Ƙarfafa Ƙarfafa Ƙarfafawa: Gyaran allura

Sauri & Lokacin samarwa
- Injection Molding: Da zarar an yi gyare-gyare, samarwa yana da sauri sosai, yana samar da dubban sassa a kowace awa.
Buga 3D: Yana ɗaukar tsayi sosai, musamman ga manyan sassa ko hadaddun sassa (zai iya ɗaukar sa'o'i kowane yanki).

Nasara don Saurin Samar da Babban Sikeli: Tsarin allura

Farashin kayan aiki & Zabuka
Ƙirƙirar allura: Yana amfani da robobi da yawa (ABS, PP, PC, da dai sauransu), kuma siyayya mai yawa yana rage farashin kayan.
-3D Buga: Mafi tsada kowane gram na abu, amma yana ba da ** babban sassauci a cikin samfura tare da kayan daban-daban (PLA, resin, nailan, da sauransu).

Nasara don Kayayyaki masu Tasirin Kuɗi a Samar da Jama'a: Tsarin allura
Nasara don Sauƙaƙan Kayan Aiki a Samfura: Buga 3D

Mafi kyawun Abubuwan Amfani
Injection Molding: Mafi kyau ga taro samar (1,000+ raka'a), inda high mold kudin ne barata.
Buga 3D: Mafi kyawun samfuri, samar da ƙaramin ƙara (raka'a 1-100), da ƙirar al'ada waɗanda zasu yi tsada sosai don ƙirƙira.
- Don ƙananan ƙarar (1-100 sassa) 3D bugu ya fi rahusa (babu farashin mold).
- Domin matsakaici zuwa babban girma (1,000+ sassa) allura gyare-gyaren yana da rahusa (ƙananan farashin kowane sashi).

Idan kuna samar da ƴan samfura ko ƙananan batches, bugu na 3D shine zaɓi mafi inganci. Amma idan kuna buƙatar ** dubunnan sassa iri ɗaya, gyare-gyaren allura shine mafi kyawun saka hannun jari na dogon lokaci.

Kuna son shawarwari kan takamaiman kayan aiki ko dabarun samarwa?